Some Tips to Applying Hazard Safety Tapes to Stairs to safe from accidents?

The majority of workplace accidents are slips and falls. This amounts to thousands of Rupees in being lost by companies as staff take time off to recover. In addition to this, companies abide by strict health and safety regulations and ensuring stairs are safe is an important element to reduce the risk of accidents within the working environment and best thing is to conduct the safety trainings through iosh course in islamabad.
Stairs can be slippery, uneven and even dark, making it easy for someone to miss their footing and end up in a heap at the base of the stairwell. As you can imagine this can result in serious injuries, broken bones to head injuries and more.
Hazard safety tapes have the typical bright yellow and black warning chevron or coloring, immediately ensuring that staff and customers see the area as high risk and are a focal point during iosh course in islamabad. These tapes are often covered in an anti-slip coating, making them an ideal addition to any staircase in the building to eliminate the risk of injury and ensure that there is good grip as staff and customers make use of the stairs daily.
Applying hazard safety tapes to stairs is relatively easy and won't take long once you have the hang of it. The first step is to close the steps off to foot traffic while you work; enabling you to concentrate on each step at a time and apply the tape accurately to ensure that it sticks and provides you with years of security and safety for your employees.
Start by cleaning the stairs. It doesn't matter if they are wood, stone, concrete or tile. You want to sweep the stairs to remove any dust and dirt, then wash them with a good quality solvent to eliminate any in-ground dirt and then scrape them to ensure all the dirt and any old tape is removed.
Left with your dry stairs, you will want to apply a primer to the area where you intend placing your hazard safety tape. The best place for the tape is on the end of each step, the thickness you choose can be based on personal preference. Primer is usually available directly from your anti slip tape supplier.
Start at the first step & take part in iosh course in rawalpindi. You want the tape to run from one side of the step to the other, you can leave a small gap on either side as no one is going to walk on the very edges of the stairs.
Once cut you need to carefully peel back the backing, exposing the sticky side of the tape. Don't peel it all the way, just a short way to give you place to start. Carefully position the tape on the edge of the step and push down hard on the tape to ensure maximum hold. Slowly move your hand over the top of the tape, pushing it into position as you peel off the back.
Once in place you can push down with your hand or use a roller. You want to ensure that the hazard safety tape is firmly in place without any air bubbles underneath to provide you with maximum grip and security.
The final step is to complete the remainder of your stairs following the same steps and procedures until they are all completed, safe and secure.